Driving the Kenworth T680, T880 - Truck News (2024)

CHILLICOTHE, Ohio — A US$400-million investment by Paccar in the development of the Kenworth T680/T880 cab platform appears to be paying off.

“It has really revolutionized our business,” Kurt Swihart, director of marketing with Kenworth said of the T680 on-highway and T880 vocational models. The T680 was launched in 2012 and the T880 at the end of 2013. The two models now represent about 90% of the production at Kenworth’s Chillicothe, Ohio truck plant, which this week played host to a Right Choice customer event.

Driving the Kenworth T680, T880 - Truck News (1)

More than half the trucks Kenworth is building today are T680s, its flagship on-highway model. Additional sleeper configurations have been added to the truck over time, and that roll-out is now complete. The T680 can be had with a 76-inch mid-roof or high-roof, a 52-inch mid-roof or 40-inch sleeper. Swihart said most customers are ordering the 76-inch condo-style high-roof bunk.

But for those in tanker or flatdeck applications, the mid-roof can provide up to a 5% fuel economy benefit, while still allowing a 6’8” driver to stand upright.

The T680 Advantage is a fuel economy spec’ that was introduced in 2014 and now accounts for about a third of T680 sales. The Advantage comes with a series of fuel-saving specifications – chassis fairings, automated manual transmission and fuel-efficient drive axles – as well as the Paccar MX-13 engine. Swihart said it offers about a 10% fuel economy improvement versus a non-optimized spec’.

Subtle refinements to the package have been ongoing. For example, a new chassis fairing design is flared to better deflect air along the side of the trailer and away from the underbody. The new fairing replaced the previous one May 9.

Driving the Kenworth T680, T880 - Truck News (2)

More customers are spec’ing automated manual transmissions, Swihart noted, adding these now account for about 70% of T680 sales.

“A couple of years ago, maybe a quarter of T680s would get automated manual transmissions,” he said. “That has nearly tripled over the past three to four years.”

Kenworth has also added a battery-based idle management system to its portfolio to provide eight to 12 hours of air-conditioning. It can be coupled with an optional bunk heater and/or inverter for heating and power requirements. The company has supplemented this with a new auto start/stop system, which automatically starts the engine when the batteries need a boost. This new feature also monitors engine oil temperature and will start when necessary in cold weather to prevent fuel from gelling.

Also new to Kenworth is its TruckTech+ remote diagnostics platform, now installed on 10,000 vehicles.

“That’s the seed of a much broader connected truck platform,” Swihart said.

Another new offering is Bendix Wingman Fusion, a collision avoidance system that combines camera and radar technologies. Wingman is being ordered in about 30% of T680s, Swihart noted. The company is also enjoying a higher take rate for its proprietary Paccar MX-13 engine.

The T880 vocational truck is also enjoying an increased market presence. Kenworth still offers its predecessor, the T880, but most vocational customers have converted over to the new model.

Vocational buyers as well are showing greater acceptance of the MX-13, which can produce up to 500 hp and 1,850 lb.-ft. of torque. Complimenting the MX-13 is the new MX-11, which can provide a weight savings of 400 lbs compared to the 13-litre. Launched in January, the MX-11 can produce up to 430 hp and 1,550 lb.-ft., adequate for many vocational applications such as dump and ready-mix, Swihart said.

“The majority of sales have been in ready-mix applications,” he added. “But it’s also a great engine for dump applications, bulk haul – anywhere customers are looking for any way to be able to take weight out of the overall vehicle package.”

Driving the Kenworth T680, T880 - Truck News (3)

The 40-inch mini-sleeper was designed for vocational operators, especially those in the oilfield or in heavy-tow applications where the driver is only occasionally out overnight. It offers a 260-lb weight savings compared to the previously smallest available 52-inch bunk.

Turning to medium-duty, Swihart said Kenworth is coming off a record year in which it controlled 9.2% of the Canada/US Classes 6/7 segment. Sales were buoyed by the introduction of a new T370 configuration with 46,000-lb rear suspension rating.

“We think there’s a significant market opportunity out there,” Swihart said of the ‘Baby 8’ or heavy-medium-duty segment. It’s geared towards municipal, dump, tanker and other vocational applications.

A fleet of eight Kenworth trucks was made available for test drives. I spent time in the Kenworth T880 with 40-inch bunk, since it was designed with Canadian operators in mind. The T880 cab offers comforts and amenities that were carried over from the on-highway product and were once the exclusive domain of linehaul drivers. The sloped hood and expansive one-piece windshield offered excellent visibility.

The MX-13 engine with 500 hp and 1,850 lb.-ft. of torque was quiet to operate and pulled the 60,000-lb gross load uphill without any trouble. We were hauling cement blocks on a flatdeck trailer. The engine brake was remarkably quiet. The T880, much like its on-highway brother, was incredibly comfortable to drive. The 40-inch bunk featured a slim 24-inch mattress. You wouldn’t want to live in this truck but it’s a nice option to have when you’re making the occasional overnight run to someplace remote. Three rear windows offered visibility out the back and let in additional daylight. Extra storage can be found underneath the bed.

I also drove the T680 Advantage with 76-inch high-roof sleeper. This truck featured the new flared side fairing and was loaded up with safety options, including Bendix Wingman. It beeped at me when I followed too closely and would go so far as to apply the brakes while in cruise if necessary. I didn’t test that claim on this drive but I’ve seen it demonstrated before in controlled environments. It works well and should eliminate most rear-end collisions. Wingman Fusion now has the ability to detect stationary objects. That’s new. And its cameras can actually read roadside signage and tell on the driver who’s exceeding the speed limit.

Like the T880, the 680 offers incredible visibility and smooth, quiet ride. It was powered by the Paccar MX-13 engine rated at 455 hp and 1,750 lb.-ft. The 53-ft. van trailer was empty, so power was obviously available in abundance. Both the T680 and T880 have a nicely appointed automotive-styled interior. The high-def NavPlus HD screen can be used to display anything from additional gauges to turn-by-turn directions.

I also spent time behind the wheel of a T880 mixer and T880 super dump, two configurations that show off the versatility of this model.

Driving the Kenworth T680, T880 - Truck News (4)
Driving the Kenworth T680, T880 - Truck News (2024)

References

Top Articles
Latest Posts
Article information

Author: Neely Ledner

Last Updated:

Views: 5582

Rating: 4.1 / 5 (42 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.